MelonitePVD CoatingsEngineered BushingsTribology Testing

Engineered Bushings Overview

For more than 50 years, HEF has designed and developed high performance bushings, rings and joints for demanding applications in industries such as construction, mining, railroad, and agriculture. HEF bushings are recognized worldwide for their excellent frictional and anti-seizure properties, and their ability to withstand high loads. HEF bushings are also industry’s choice for applications requiring extended intervals between lubrication. Our extensive tribology laboratories give our customers a major advantage in determining precisely what bushings will best meet stringent performance and cost requirements.

Three factors combine to give our engineered bushings exceptional serviceability for high-load/low rotational speed applications that are our specialty. Those factors are:

Cross-hatching involves a network of grooves on the inner surface of the bushing. For a lubricated joint, a grease reservoir is built-up in the interconnecting channels, allowing lubrication intervals to increase by as much as 100%. Debris present in the contact zone often exhibits very high hardness, leading to premature joint wear in many industrial situations. Cross-hatching allows effective evacuation of unwanted particles and debris.

Surface cavities provide a lubricant reserve, allowing the joint to be operated maintenance-free, or with very long lubrication intervals. Grease is not evacuated and is retained at the contact points. For high sliding speeds, surface cavities allow the onset of a local hydrodynamic friction mode: contact pressure is then borne by the local grease bearings.

HEF offers several patented bushing designs, in a broad range of sizes, as well as carburized and ground sleeve bearings. To determine the best design for a particular application, designers should first consider the constraints of the work environment, including abrasion, loading, corrosion and maintenance requirements.

When selecting the appropriate bushing for each application, the pressure-velocity (PV) factor is particularly important. For joints operating under dry or greased conditions, the thermal energy generated by friction is proportional to the pressure (P), the sliding velocity (V) and the friction coefficient (F) between the sliding surfaces. Given a pair of materials, there is a maximum PV beyond which surfaces can no longer absorb the generated friction, leading to seizure or melting of the surfaces. Each of the HEF bushing designs has its own PV curves, which are indispensable for determining the appropriate bushing for particular applications and operating conditions.

In addition to bushings and bearings, HEF supplies a broad range of other friction components, including pins, shafts and sleeves; slides and pads, washers, rollers, screws and nuts.